Native Instruments MASCHINE MK3 Manual page 546

Controls
Level
Order
If MASCHINE is running as a plug-in, the external stereo outputs Ext. 1–16 available in
the Dest. selectors of the
your host. This allows you to send auxiliary outputs of individual Sounds or Groups from
MASCHINE to their own mixer channels within your DAW, for example.
Setting Up the Auxiliary Outputs of Sounds and Groups in Mix View
You can also easily set up auxiliary outputs for your Sounds and Groups in MASCHINE's Mixer:
1. Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
Description
Adjusts the level of the signal sent to the Aux 1 or Aux 2 output.
If Order is set to Pre, the channel will be fed into Aux 1 or Aux 2
before the Level and Pan
page are applied. If Order
and Pan settings of the main output also affect the signals sent to
the auxiliary outputs.
AUX 1 and AUX 2 section will correspond to virtual outputs in
Audio Routing, Remote Control, and Macro Controls
settings of the MAIN section on the
is set to Post (default setting), the
Audio Routing in MASCHINE
Audio
Level
MASCHINE - Manual - 546