Native Instruments MASCHINE MK3 Manual page 880

Parameter
PAN (Knob 3)
ROOT KEY (Knob 4)
Page 4 – ENVELOPE Parameters
This amplitude envelope can be used to get rid of clicks after slicing; you can either apply it to
the Zone of the whole Sample or to individual Zones for selected Slices.
The ZONE page on the controller, page 4 of 5: ENVELOPE parameters.
Parameter
ATTACK (Knob 1)
DECAY (Knob 2)
Hold SHIFT when turning the Knobs to adjust the parameters in finer increments.
Page 5 – MAP Parameters
The MAP page contains the parameters defining the key and velocity ranges of the Zone.
Description
Sets the panorama position of the focused Zone.
Adjusts the root key of the focused Zone, that is the key at which the
Sample will be played back at its original pitch.
Description
Adjusts how quickly the Sample/Slice reaches full volume after being
triggered.
Adjusts how fast the Sample/Slice dies down.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE - Manual - 880