Native Instruments MASCHINE MK3 Manual page 249

Volume and Velocity Shortcuts
The VOLUME button.
In Pad Mode, Keyboard mode or Chords mode:
1. Press the VOLUME [Velocity]
2. To change the output level of the Master (i.e. the overall output level of MASCHINE), sim-
ply turn the 4-D encoder.
3. To change the output level of a Group, hold its Group button (first navigate to its Group
bank if necessary) and turn the 4-D encoder.
4. To change the output level of an individual Sound, hold its pad and turn the 4-D encoder.
In Step mode:
To change the velocity of a selected step in Step mode, hold its pad and turn the 4-D en-
►
coder.
The adjusted value is temporarily shown on the left display.
→
To adjust the value in finer increments, press and turn the 4-D encoder (or hold
while you turn it).
These shortcuts control the
Group's, and Sound's Output properties, respectively. See section
the Main Output of Sounds and Groups
Outputs of MASCHINE
button.
LEVEL parameter in the
and ↑11.1.4, Configuring the Master and Cue
for a detailed description of these properties.
SHIFT
AUDIO page of the Master's,
↑11.1.2, Configuring
MASCHINE - Manual - 249
Playing on the Controller
Playing Tools