Flanger - Native Instruments MASCHINE MK3 Manual

Parameter
Engage
Frequency
FILTER
Type
Resonance
Setup Page
Parameter
RANGE Section
Min. Freq
Max. Freq
SATURATION Section
Saturation
Out Level
14.7.2

Flanger

A comb filter effect with more than a few tricks up its sleeve. Get performance-ready flanger or
phaser effects, or expose its wild side – setting higher decay and frequency values unleashes
ping-pong delay-like flutter effects.
Description
Activates the filter.
Sets the cutoff frequency according to the min/max range
parameters.
Selects from Low Pass, Band Pass and High Pass modes.
Sets the resonance of the filter. Values over 100% will lead
to self-oscillation—be careful! Turn down the Output Gain
(and turn up the Saturation to compensate) in order to avoid
extremely loud ringing. Note that the resonance will sound
more pronounced at lower saturation settings and vice versa.
Description
Sets the lower limit for cutoff frequency.
Sets the upper limit for cutoff frequency.
Sets the input gain of the filter.
Sets the output gain of the filter.
Effect Reference
Perform FX
MASCHINE - Manual - 730