Native Instruments MASCHINE MK3 Manual page 761

▪ The Pattern displays its name and color.
▪ The corresponding Pattern will now be played by that Scene.
▪ Additionally this Pattern is loaded in the Pattern Editor, ready to be modified.
Patterns and the Pattern Editor are described in chapter
Creating a New Empty Pattern in Ideas View
You can also create a new empty Pattern in Ideas view:
In the Ideas view, double-click the empty Pattern slot located in the column of the de-
►
sired Group.
A new empty Pattern is created.
→
Removing a Pattern in Ideas View
You can also remove a Pattern from a Scene in Ideas view:
Click the highlighted Pattern for any Group to remove it from the Scene.
►
The Pattern is removed from the Scene:
→
▪ The corresponding Pattern will not be played by that Scene anymore.
▪ The Pattern itself is left untouched.
Assigning a Pattern to a Scene on the Controller
Assigning a Pattern is done in Pattern mode.
First select the Scene to which you want to assign a Pattern:
1. Press SHIFT + (Section) to enter Ideas view.
⇨
The software switches to Scene mode.
2. Press and hold SCENE
bank.
3. Press the pad corresponding to the Scene in which you want to assign a Pattern.
(Section) then press Button 7 and 8 to select the desired Scene
↑10, Working with Patterns.
MASCHINE - Manual - 761
Working with the Arranger
Using Ideas View