Creating And Editing Modulation In The Control Lane - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

to enter Auto-write mode.

At the bottom of the displays, non-modulatable parameters disappear. Among the remain-

ing parameters (all modulatable), the value of each continuous parameter is replaced by a

While holding AUTO, turn the desired Knob 1–8 under the displays to adjust the deviation

to the actual value as you see fit.

Your modulation gets recorded now. Each Knob movement is stored in your Pattern as a

modulation event. It will be automatically played with your Pattern upon its next cycle.

If you want to discard the modulation you recorded and try again:

and again turn the Knob you used to record modulation to delete all modula-

tion events for this parameter.

You can also delete all modulation events for all parameters of the channel:

cused Sound or Group.

You can also record modulation from the step sequencer! See

ulation in Step Mode

Creating and Editing Modulation in the Control Lane

You can also create, select, and edit individual modulation points in the Modulation pane of the

Control Lane.

Displaying the Modulation Pane in the Control Lane

To see and edit modulation for parameters of a Sound, click the desired Sound in the

Sound List (left of the Pattern Editor) and click the

To see and edit modulation for parameters of a Group, click the desired Group in the

Group List (left of the Arranger) and click the

Auto) to delete all modulation for all parameters of the fo-

for more information.

↑10.3.3, Recording Mod-

tab in the Control area.

tab in the Control area.

Working with Patterns

Recording and Editing Modulation

MASCHINE - Manual - 493

Show Quick Links

Table of Contents