Native Instruments MASCHINE MK3 Manual page 234

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

To assign the selected Sound slot(s) to a Choke group and set its/their Choke mode (Master or

Slave), do the following:

Click the Pad View button above the Sound List in the Pattern Editor to show the Pad

view for the focused Group.

section click the

or choose None (default setting) to remove the Sound from its current Choke group.

(default setting) and

Repeat the steps above to assign other pads to the same Choke group.

The Hi-hat is an ideal candidate for making use of Choke groups! See

for more details!

Adjusting the Choke Multiple Sounds with different Choke Values

label next to

selected Sounds to that same Choke group. This also applies to the Master/Slave setting

Sound slots 1 to 4 are selected. If they have different Choke values, a MULTI label appears (left). When you click it and

select a new Choke from the list (middle), this new group is applied to all selected Sounds.

value and select the desired group 1–8 from the list

section click the

and select the desired value from the list to set all

or Slave) to switch the Sound

↑8.4.3, Hi-hat –

Playing on the Controller

Adjusting the Pads

MASCHINE - Manual - 234

Show Quick Links

Table of Contents