Selecting And Editing Zones In The Map View - Native Instruments MASCHINE MK3 Manual

Multiple selection is not possible from the controller. Hence, setting the focus to the
previous/next Zone automatically deselects any other Zone, the focused Zone now being
the only selected Zone.
The Sample can be played back on the Cue channel at any time by pressing the corresponding
pad on your controller. When the Sample is played back, the Playhead indicator (vertical line)
shows you the current play position within the waveform on the right display.
For more information on the Cue channel, please refer to section
Cue Bus.
Removing a Zone
On the ZONE page of Sampling mode, press Button 5 (REMOVE) to remove the focused
►
Zone from the Sound.
16.5.4

Selecting and Editing Zones in the Map View

The Map view is visible when the Sample View button (showing a little waveform icon at the
right of the Zone tab) is disabled.
Disable the Sample View button to see the Map view.
The Map view contains following elements:
Sampling and Sample Mapping
Mapping Samples to Zones
↑12.2.6, Using the
MASCHINE - Manual - 867