Naming Scenes - Native Instruments MASCHINE MK3 Manual

Appending a Scene to the Arrangement Using the Controller
Using your controller you can append a Scene to the arrangement.
1. Press SHIFT + SCENE
2. Press and hold SCENE
3. Press Button 7 and 8 to select the desired Scene bank.
4. Press Button 3 (APPEND).
5. Press the pad corresponding to the Scene you want to append. You can do this more than
once, tapping a series of pads will add all of those Scenes into Sections at the end of the
Arranger in one quick step.
Release the SCENE (Section) button or turn off

15.2.12 Naming Scenes

By default, Scenes are named
use custom names of your own. Naming is only available from within the software, but any
changes will also show up on your controller.
Renaming Scenes in the Arranger
To rename a Scene in the Arranger:
1. Double-click the Scene name at the top of the Arranger:
You can also right-click ([Ctrl]-click on macOS) the Scene slot or the corresponding cell in
(Section) to enter Ideas view.
(Section) to enter Scene mode.
APPEND
Scene 1, Scene 2,
when done.
Scene 3, etc. You can rename Scenes and
Working with the Arranger
Using Ideas View
MASCHINE - Manual - 773