Editing Events In Step Mode - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

When Follow is enabled, the right display and your pads automatically switch to the next 16

steps as soon as the playback position reaches the end of the portion currently displayed.

Editing Events in Step Mode

In Step mode you can quickly adjust the parameters of events on particular steps.

Editing Events in Step Mode on the Controller

You can adjust the various settings of your events via the left display:

Press and hold for a second the pad(s) of the step(s) you want to edit. If you want to ad-

just the last step you have created, you can skip this step: the last created event is auto-

matically selected. You can also use the 4-D encoder or the Page buttons left of the dis-

plays to quickly select individual steps.

Use Knobs 1–4 as described in the table below to edit the position, length, pitch, and

velocity of the selected events:

Editing Tool

Knob 1 (POSITION)

Knob 2 (PITCH)

Nudges selected events, i.e. shifts selected events on the timeline

according to the Nudge Grid (the events' offsets relative to the Nudge

Grid are preserved). Hold

override the Nudge Grid quantization and adjust the positions in

extremely small increments. See section

Grid and the Nudge Grid

If one event only is selected, its position is shown under POSITION. If

several events are selected, the field shows (MULTI).

Transposes the selected events by semitones.

When only one event is selected, its pitch is shown under PITCH. If

several events are selected, the field shows (MULTI).

Recording Patterns with the Step Sequencer

while you turn the knob to temporarily

↑10.1.7, Adjusting the Step

for more information on the Nudge Grid.

Working with Patterns

MASCHINE - Manual - 457

Show Quick Links

Table of Contents