Following The Playback Position In Your Project - Native Instruments MASCHINE MK3 Manual

15.1.2

Following the Playback Position in Your Project

If the Arranger doesn't display the entire Loop Range currently selected, at some point the
playhead will go beyond the portion of your Project currently displayed in the Arranger and you
might loose track of the playback position. To prevent this, you can force the Arranger to follow
the playhead:
Activate the Follow button to keep following the playhead in the Arranger.
To follow the playhead position in the Arranger during playback, click the Follow button in
►
the MASCHINE Header.
The Follow button lights up in the MASCHINE Header. The Arranger will now switch to
→
the next portion of your Project (with the same zoom factor) as soon as the playhead
reaches the end of the portion currently displayed. This way, you always see the portion of
your Project that is currently played.
The Follow function will be automatically disabled as soon as you manually scroll in the
Arranger or the Pattern Editor (in the software or from your controller).
The Follow function affects both the Pattern Editor and the Arranger simultaneously (see sec-
tion ↑10.1.3, Following the Playback Position in the Pattern
low function in the Pattern Editor).
To follow the playhead position during playback:
Press the FOLLOW
►
button in the Transport section (at the bottom of your controller).
Working with the Arranger
for more information on the Fol-
MASCHINE - Manual - 754
Arranger Basics