Kick – Rasper - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Kick – Rasper

The Rasper kick is an acoustic bass drum emulation providing a unique and organic sound that

can be easily adapted into Drum'n'Bass or Dubstep productions. Its two crispness modes allow

for a wide range of bass drums.

The parameters described below are presented as they appear in the Control area (Ar-

range view). The same parameters are available in the Plug-in panel within the Plug-in

Strip (Mix view). See

MAIN Section

CRISPNESS Section

↑12.4, The Plug-in Strip

for more information on this.

Selects the engine used in the Kick Plug-in. If you change this

setting, please refer to

Adjusts the pitch of the drum played by the middle C, measured in

MIDI note numbers and cents. Available values range from 38.00 to

62.00. The default value is 50.00. For more details see

Pitch Range, Tuning, and MIDI

Adjusts the duration of the sound's tail, measured as a percentage.

Available values range from 0.0 to 100.0 % (default: 50.0 %).

Simultaneously adjusts the amount of the pitch envelope and the

amount of noise of the attack. Available values range from 0.0 to

100.0 % (default).

Adjusts how hard the drum is hit. Available values range from

0.0 % (softest) to 100.0 % (hardest). The default value is 75.0 %.

Selects from two different crispness modes: Select A (default) for a

tambourine-like sound, and select B for a snare-like sound.

Using the Drumsynths

MASCHINE - Manual - 351

Show Quick Links

Table of Contents