3.
This opens the following dialog:
▪
Click
Scene Enabled
▪
4.
In the submenu that opens, select the source you want to use for changing the MIDI Pro-
gram Change messages. A list of connected controller names appear in the drop-down
menu, or you can select
5.
Then from the drop-down menu select
Program Change
to trigger your Scenes via MIDI Program Change messages.
6.
If necessary, reopen the same submenu and select the MIDI channel the Scene changes
should receive MIDI messages from (channel 1 by default).
from the dialog.
None
to disable the feature.
MIDI Note
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
to trigger your Scenes via MIDI notes, or
MASCHINE - Manual - 568