Native Instruments MASCHINE MK3 Manual page 466

Depending on the current pad mode (Group mode or Keyboard mode, see
View in the Software), these tools will select events differently, as described in the following
paragraphs.
Event Select Mode: Selecting Events (Pads in Group mode)
In Group mode (the default mode of the pads) each pad represents a specific Sound of the
focused Group.
When your pads are in Group mode the Event Select mode looks as follows:
Selecting events on the controller with the pads in Group mode.
▪ The left display shows an overview of the events in your Pattern for all Sounds in the
Group.
▪ The right display shows a detailed view of a portion of your Pattern with events and their
velocities for the focused Sound.
You can adjust the right display as follows:
1. Turn Knob 5 and 6 to zoom in/out and scroll on the time axis (horizontal axis), respective-
ly.
2. Turn Knob 7 to zoom vertically in/out of the Sounds.
You have following selection tools at your disposal:
Working with Patterns
Editing Events
↑5.1.1, The Pad
MASCHINE - Manual - 466