Native Instruments MASCHINE MK3 Manual page 756

◦ If Retrigger is disabled (default setting), the next Section that is selected will play
from the same offset to the beginning of the Section: e.g., leaving the current Section
on beat 3 will cause the new Section to start playing on its beat 3. This ensures that
the global groove of your track is not interrupted!
15.1.3.1 Jumping to Other Sections in the MASCHINE Software
In the software, the Perform Grid and the Retrigger setting can be adjusted in the MASCHINE
Header:
Adjusting the Perform Grid and Retrigger setting.
To adjust the Perform Grid, click the value left of the
►
Header and select the desired division from the menu:
The next time you select a new Section or group of Sections for looping, the switch will
→
happen on the next division selected here.
To enable/disable the Retrigger setting, click the little cog wheel in the MASCHINE Head-
►
er and select Retrigger from the menu.
Working with the Arranger
SYNC label in the MASCHINE
MASCHINE - Manual - 756
Arranger Basics