Tap Tempo - Native Instruments MASCHINE MK3 Manual

2. To change the tempo of the Master (i.e. the tempo of your Project), simply turn the 4-
D encoder.
3. To change the tune of all Sounds in a Group, hold the desired Group button (first navigate
to its Group bank if necessary) and turn the 4-D encoder.
4. To change the tune of an individual Sound, hold its pad and turn the 4-D encoder.
In Step mode:
To change the tune of a selected step in Step mode, hold its pad and turn the 4-D encod-
►
er.
The adjusted value is temporarily shown on the left display.
→
To adjust the value in finer increments, press and turn the 4-D encoder (or hold
while you turn it).
At the Master level, the shortcut controls the Tempo parameter in the Header:
The Tempo parameter in the software's Header.
At the Group and Sound level, the shortcut works only with Sounds containing a Sam-
pler or a Drumsynth Plug-in. The shortcuts control the
GATE section in the
of the MAIN section in the
the shortcut will affect all Sounds of the Group that contain a Sampler or Drumsynth
Plug-in. For more details on the
Range, Tuning, and MIDI Notes
tings / Engine for the Drumsynths.
5.4.5

Tap Tempo

You can quickly define the tempo of your Project via the
the controller:
Repeatedly tap the
►
PITCH / ENVELOPE page of the Sampler, and the
MAIN page of any Drumsynth. If you hold a Group button,
TUNE parameter, please refer to section
for the Sampler and section
TAP button to set the desired tempo.
SHIFT
TUNE parameter of the PITCH /
TUNE parameter
↑8.1.5, Pitch
↑6.2.1, Page 1: Voice Set-
TAP button in the Transport section of
MASCHINE - Manual - 252
Playing on the Controller
Playing Tools