Native Instruments MASCHINE MK3 Manual page 586

Once the Assignment area is open, when you switch to other Parameter pages the As-
signment area follows your selection: it always shows the assignments for the page cur-
rently displayed above.
The Pages tab can be clicked only for Plug-ins, External MIDI device Control Change as-
signments, and for Macro properties. For all other Plug-ins and Channel properties, pa-
rameters and Parameter pages are not editable, and the
active. For more information on how to assign parameters of Native Instruments or Ex-
ternal Plug-ins to Parameter pages, please refer to
eter Pages.
When the Pages pane of the Assignment area is open, you also notice a few changes in the
Control area above.
The Control area with Macro Properties displayed and the Pages pane active in the Assignment area underneath.
(1) Delete Page button ("x" symbol): Click the little "x" after a page name to delete this Parame-
ter page.
(2) Add Page button ("+" symbol): Click the little "+" after the last page label to append a new
page. By default, pages are labeled "Page 1," "Page 2," etc. You can change page labels by
defining sections within your pages via the Section Label fields (3).
↑6.3.3, Setting Up Your Own Param-
1
7
6
Audio Routing, Remote Control, and Macro Controls
Creating Custom Sets of Parameters with the Macro Controls
Pages tab is grayed out and in-
2
3
5
MASCHINE - Manual - 586
4