Adjusting The Key, Choke, And Link Parameters For Multiple Sounds - Native Instruments MASCHINE MIKRO MK3 Manual

Adjusting the Base Key in the Software
By default the base key of every Sound slot is C3 (i.e. middle C in the MASCHINE convention).
To change the base key of the selected pad(s) / Sound slot(s) in the software:
1. Click the Pad View button above the Sound List in the Pattern Editor to show the Pad
view for the focused Group.
2. Click the Key value and drag your mouse vertically, or double-click it, enter a new value
on your computer keyboard, and press [Enter] to confirm.
To change the base key of the selected Sound on your controller:
1. Press PAD MODE
2. To adjust the base key in semitones, turn the Encoder.
3. To adjust the base key in octaves, press
²
The new base key is indicated in the display.
6.2

Adjusting the Key, Choke, and Link Parameters for Multiple Sounds

In the software, if you select multiple Sounds with different Key,
corresponding parameters in Pad view now display MULTI. On your controller in Pad Mode, the
corresponding parameters now display (MULTI).
Moreover, you can adjust these parameters for the selected Sounds as described below.
Adjusting the Key Parameter for Multiple Sounds with different Key Values
►
Click and drag the
Sounds. While dragging, the field displays a
will apply to all Sounds as you release the mouse button.
to enter Pad Mode.
SHIFT
MULTI label next to
Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
and turn the Encoder.
Choke
Key to transpose the base key of all selected
+/-x value indicating the transposition that
Playing on the Controller
and/or Link values, the
MASCHINE MIKRO - Manual - 231