Enabling Auto Length - Native Instruments MASCHINE MK3 Manual

15.3.13 Enabling Auto Length

By default a Section is set to Auto Length allowing it to resize automatically to the content
within the Section. If the length of a Section is manually adjusted by truncating or lengthening
the Section end marker, Auto Length is discarded and the Section automatically set to Manual
Length.
Using the software or controller it is possible to quickly reset a Section to back to Auto Length
in order to return to the Section to its default state and reveal any truncated (hidden) content.
When Auto Length is enabled, the Manual Length settings are discarded and the Section is re-
sized according to the Patterns in the assigned Scene, and will continue to resize with the con-
tent unless the length is again manually adjusted.
To enable Auto Length for a Section in the software:
1. Right-click ([Ctrl]+click on macOS) on the Section.
2. Click Auto Length
Auto Length is enabled and the selected Section is automatically resized to fit the content
→
of the Patterns within the assigned Scene. Any manual adjustments that were previously
made are discarded.
To enable Auto Length for a Section using your controller:
1. Press SHIFT + SCENE
2. Press SCENE (Section) to access the Section page.
in the menu.
(Section) to enter Arranger view.
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 801