Native Instruments MASCHINE MK3 Manual page 536

Controls
AUDIO Section
Source
Gain
If MASCHINE is running as a plug-in, the external stereo inputs Ext. 1–4 available in
the Source selector of the
This allows you to send mixer channels from your DAW to individual Sounds within MA-
SCHINE, for example. Please refer to your host documentation to know how to route sig-
nals to the virtual audio inputs of your MASCHINE plug-in.
As any Parameter page of any Channel properties or Plug-in, this page is also available
on your controller. To access it and change its parameters, simply use the common
workflow described in
Pages in the Control
Applying Effects to External
Configuring External Inputs for Sounds in Mix View
You can also easily send external audio to Sounds in MASCHINE's Mixer:
1. Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
Description
Selects an external audio input to be routed to the Sound. Available
entries are None (no external input) and the four external stereo
inputs Ext. 1–4, as well as any additional output(s) of multiple-
output Plug-ins loaded in other Sounds of the same Group. Check
the Routing page of the
physical inputs of your audio interface to the virtual audio inputs of
MASCHINE.
Adjusts the gain of the incoming signal.
MAIN section will correspond to virtual inputs in your host.
↑2.3.9, Navigating Channel Properties, Plug-ins, and Parameter
Area. Furthermore, you will find a step-by-step use case in
Audio.
Audio Routing, Remote Control, and Macro Controls
Audio and MIDI Settings
Audio Routing in MASCHINE
panel to route the
↑13.2,
MASCHINE - Manual - 536