Browser Plug-In Slot Selection - Native Instruments MASCHINE MK3 Manual

Plug-in Menu Entry
Save As...
Save As Default... (only
when a Native Instruments
or External Plug-in is
loaded)
Note that the first two submenus Native Instruments and External only show the Plug-
ins that are enabled in the
section ↑2.6.6, Preferences – Plug-ins
The edit commands (Cut, Copy, and Paste) and preset management commands (Open,
Save As..., and Save As Default...) available at the bottom of the Plug-in menu will be
covered in section
Presets, respectively.
6.1.3.1

Browser Plug-in Slot Selection

Select a plug-in slot directly from the Browser using the
vides temporary access to the Plug-in mode allowing you to select a plug-in slot from the Plug-
in List. This can be accomplished from the Browser when loading content into all three levels
of the MASCHINE audio routing system: in Sounds, in Groups, and in the Master.
To change the focus of the plug-in slot from the Browser:
1. Press the BROWSE
2. Press SHIFT, then press button 5 or 6 to select to a plug-in slot.
The focus slot can be selected from the browser.
→
6.1.3.2 Loading, Removing, and Replacing a Plug-in on your Controller
On the controller, do the following:
1. At the top left of your controller, press the
play the Plug-in slots of the selected Sound, Group or the Master.
Description
Allows you to save the current Plug-in settings as a preset for
later use. This preset will appear in the Browser.
Allows you to save the current Plug-in settings as a default
preset. This default preset will be recalled each time you load
the Plug-in from the Plug-in menu.
Plug-ins page of the
Page.
↑6.1.7, Moving Plug-ins and
button.
PLUG-IN
Preferences panel. For more on this, see
↑6.1.9, Saving and Recalling Plug-in
SHIFT button. The
button to enter Control mode and dis-
Working with Plug-ins
Plug-in Overview
SHIFT button pro-
MASCHINE - Manual - 288