Table of Contents
Advertisement
For information on working with effects (internal effects as well as plug-in effects), please
refer to chapter
single MASCHINE internal effect in chapter
4.1.4
Adjusting the Module Parameters
The procedure for adjusting the Module parameters is common to all types of Modules. If a
Module provides more than eight parameters, these will be split into Parameter pages, each
page containing up to eight parameters.
Hardware
1.
On your MASCHINE hardware controller, press the Page buttons to step through the vari-
ous Parameter pages, if any.
2.
Use Knobs 1–8 to adjust the values of the parameters in the displayed page.
Software
In the software, the main part of the Control area shows the parameters for the selected Mod-
ule. This is called the Parameter area.
↑8, Effect
Reference. Moreover, you will find a detailed description of every
↑4, Working with
Sounds.
MASCHINE MIKRO MK2 - Manual - 83
Working with Sounds
Sound Basics
Advertisement
Table of Contents
