Native Instruments MASCHINE MK3 Manual page 251

To change the position of a selected step in Step mode, hold its pad and turn the 4-D en-
►
coder.
The adjusted value is temporarily shown on the left display.
→
To adjust the value in finer increments, press and turn the 4-D encoder (or hold
while you turn it).
These shortcuts control the
Group's, and Sound's Groove properties, respectively. See section
detailed description of these properties.
In the software you can also adjust the Swing amount of your Project via the
the Header:
The SWING control in the software's Header.
Tempo and Tune Shortcuts
The TEMPO button.
In Pad Mode, Keyboard mode or Chords mode:
1. Press TEMPO [Tune]
AMOUNT parameter in the
button.
SHIFT
SWING page of the Master's,
↑5.4.3, Groove for a
SWING
MASCHINE - Manual - 251
Playing on the Controller
Playing Tools
control in