Native Instruments MASCHINE MK3 Manual page 236

You can select multiple Sound slots and quickly assign them all to a particular Link
group at once!
To assign the selected Sound(s) to a Link group and set its/their Link mode (Master or Slave),
do the following:
1. Click the Pad View button above the Sound List in the Pattern Editor to show the Pad
view for the focused Group.
2. In the Link section click the
choose None (default setting) to remove the Sound from its current Link group.
3. In the same Link
tween Master (default setting) and
A Link group makes sense only if more than one pad/Sound are assigned to it!
Adjusting the Link Parameter for Multiple Sounds with different Link Values
Click the MULTI label next to
►
selected Sounds to that same Link group. This also applies to the Master/Slave setting
next to it.
Group value and select the desired group 1–8 from the list or
section click the Mode
Slave mode.
Link and select the desired value from the list to set all
value (Master or Slave) to switch the Sound be-
Playing on the Controller
Adjusting the Pads
MASCHINE - Manual - 236