Auditioning Samples - Native Instruments MASCHINE MK3 Manual

▪ In Pad Mode, pressing the highlighted pad allows you to also audition the Instrument pre-
set again.
▪ To load the Instrument preset, press the 4-D encoder or Button 8 (LOAD).
When you disable Prehear, the playback of any Instrument preset still being pre-listened is
stopped.
The Prehear signal is sent to the Cue bus of MASCHINE. For more information on the
Cue bus, see section
See also
2 Loading the Selected Files Automatically [➙ 141]
2 Loading the Selected Files Automatically [➙ 141]
3.3.3

Auditioning Samples

When you are browsing Samples, a Prehear button and Prehear Volume slider appear next to
the Autoload button.
The Prehear controls.
Click the Prehear button (showing a little speaker icon) to enable/disable Prehear.
►
When Prehear is enabled, you can directly hear Samples as you select them in the Result list
of the LIBRARY pane or
Drag the Prehear Volume slider next to the Prehear button to adjust the volume of the
►
Samples you are pre-listening to.
The Prehear signal is sent to the Cue bus of MASCHINE. This allows you to pre-listen to Sam-
ples on a distinct output pair (e.g., in your headphones) without affecting MASCHINE's main
output! For more information on the Cue bus, see section
Prehear and Autoload are mutually exclusive: Only one of them can be active at a time.
For more information on the Autoload feature, see section
Files Automatically.
↑12.2.6, Using the Cue
FILES pane.
Bus.
↑12.2.6, Using the Cue
↑3.3.1, Loading the Selected
Browser
Additional Browsing Tools
Bus.
MASCHINE - Manual - 144