Native Instruments MASCHINE MK3 Manual page 820

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Open containing folder Opens the folder on your hard disk containing the Sample, providing

Save Sample As...

(2) Zooming scroll bar

Click the main part of the scroll bar and drag your mouse horizontally to scroll through the

waveform on the horizontal axis (time), or drag it vertically to zoom in/out on the same time

axis. You can also click the left or right handle of the scroll bar and drag it horizontally to zoom

in/out while keeping the opposite border of the display at a fix position in the waveform. Dou-

ble-click the main part of the bar to reset the zoom and display the entire waveform. Alterna-

tively you can use the scroll wheel of your mouse when hovering the waveform display (1) to

zoom in/out.

(3) Timeline

Shows the time scale in bars (Sync mode) or seconds (Detect mode).

(4) Information bar

Displays the file name and the length of the recorded Sample. Click and hold the little play

icon on the left to listen to the Sample on the Cue bus (see section

for more information). Click the little circle (or pair of circle) at the far right to switch the

waveform display (1) between single-channel and two-channel display.

(5) Recording History

All the recordings you have made since you opened the current Project are stored in the Re-

cording History and displayed as mini waveforms under the waveform display. The following

actions are available:

▪ Click any mini waveform to select the corresponding recording for displaying—you can then

further edit this recording via the other pages of the Sample Editor. When selected, a re-

cording is also automatically mapped to a new Zone covering the entire key and velocity

ranges in the

page. Any existing Zones will be replaced.

▪ Click and hold the little play icon in the bottom right corner to listen to the Sample on the

Cue bus without loading it in the waveform nor in the

quick access to the original file.

Opens a Save Sample As dialog allowing to save the recorded Sample

under another name and/or to another location on your computer.

Sampling and Sample Mapping

↑12.2.6, Using the Cue

MASCHINE - Manual - 820

Recording a Sample

Show Quick Links

Table of Contents