Snare – Airy - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:
Table of Contents

Advertisement

Element
SCALE Section
Velocity
8.3.5
Snare – Airy
The Airy snare is an acoustic snare drum model that provides a realistic metallic snare sound.
The two modes available on its
wires, which allows for a wide range of snares that will cut through very well into a mix.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
Main Page
Element
MAIN Section
Engine
Tune
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
Advanced
page relate to different tension levels of the snare
↑12.4, The Plug-in Strip
for more information on this.
Description
Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 52.00 to
76.00. The default value is 64.00. For more details see
Pitch Range, Tuning, and MIDI
↑8.3, The
Snares.
Notes.
Using the Drumsynths
The Snares
↑8.1.5,
MASCHINE - Manual - 368

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents