Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 1451

A T M F
LLIED ELESIS ANAGEMENT
SHOW ATMF LINKS GUEST DETAIL
Table 38-2: Parameters in the output from show atmf links guest detail (cont.)
Related atmf guest-class
Commands
discovery
http-enable
username
modeltype
switchport atmf-guestlink
show atmf backup guest
613-50157-01 Rev C
™ (AMF) C
RAMEWORK OMMANDS
Parameter
Serial Number
Firmware Name
Firmware Version
HTTP port
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
The serial number of the guest node.
The name of the firmware operating on the guest node.
The version of the firmware operating on the guest node.
The HTTP port as specified with the
command when defining a guest class. You can set this if
the guest node provides an HTTP user interface on a
non-standard port (any port other than port 80).
http-enable
1451