G00 Rapid Positioning - Omron NY532-5400 Instruction & Reference Manual

2 G Code

G00 Rapid Positioning

This instruction positions a tool.
Modal/Non-modal
Modal group
Instruction format
Relevant G codes
Parameters
Parameter
X
Y
Z
A
B
C
Function
Use this command to position a tool.
It moves the tool from the current position to a specified position in the minimum period of time with the
CNC motor parameters and CNC coordinate system parameters. Write the command according to the
instruction format. The description of each coordinate can be omitted.
This function does not guarantee the trace. If the linear trace is required, use the linear interpolation
(G01).
The command position follows the specifications for the Absolute Dimension (G90) and Incremental
Dimension (G91).
2 - 4
Modal
01 Rapid Positioning
G00 X- Y- Z- A- B- C-
G90, G91
Name
Target X-axis Position
Target Y-axis Position
Target Z-axis Position
Target A-axis Position
Target B-axis Position
Target C-axis Position
Description
Specifies the destination position [command units] on the
X-axis.
Specifies the destination position [command units] on the
Y-axis.
Specifies the destination position [command units] on the
Z-axis.
Specifies the destination position [command units] on the
A-axis.
Specifies the destination position [command units] on the
B-axis.
Specifies the destination position [command units] on the
C-axis.
NJ/NY-series G code Instructions Reference Manual (O031)