Configuring The Bims Server Information For The Client; Configuring Gateways For The Client - H3C S3610-28P Operation Manual

Operation Manual – DHCP
H3C S3610&S5510 Series Ethernet Switches
Specify the NetBIOS node
type
Note:
If b-node is specified for the client, you need to specify no WINS server address.

2.5.7 Configuring the BIMS Server Information for the Client

A DHCP client performs regular software update and backup using configuration files
obtained from a branch intelligent management system (BIMS) server. Therefore, the
DHCP server needs to offer DHCP clients the BIMS server IP address, port number,
shared key from the DHCP address pool.
Follow these steps to configure the BIMS server IP address, port number, and shared
key in the DHCP address pool:
Enter system view
Enter DHCP address
pool view
Specify the BIMS server
IP address, port
number, and shared key

2.5.8 Configuring Gateways for the Client

DHCP clients that want to access hosts outside the local subnet request gateways to
forward data. You can specify gateways in each address pool for clients and the DHCP
server will assign gateway addresses while assigning an IP address to the client. Up to
eight gateways can be specified in a DHCP address pool.
Follow these steps to configure the gateways in the DHCP address pool:
Enter system view
Enter DHCP address
pool view
To do...
netbios-type { b-node |
h-node | m-node |
p-node }
To do...
system-view
dhcp server ip-pool
pool-name
bims-server ip ip-address
[ port port-number ]
sharekey key
To do...
system-view
dhcp server ip-pool
pool-name
Chapter 2 DHCP Server Configuration
Use the command...
Use the command...
Use the command...
2-10
Remarks
Required
Not specified by default.
Remarks
—
—
Required
Not specified by default.
Remarks
—
—