Ipv6 Routing - H3C S3610-28P Operation Manual

Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
Note:
For information about the VPN extension application, refer to the part discussing
MCE configuration.
For information about the IPv6 extension application, refer to IPv6 BGP
Configuration in IPv6 Routing.
This chapter gives no detailed commands related to any specific extension
application in MP-BGP address family view.
5.1.8 Protocols and Standards
RFC1771: A Border Gateway Protocol 4 (BGP-4)
RFC2858: Multiprotocol Extensions for BGP-4
RFC3392: Capabilities Advertisement with BGP-4
RFC2918: Route Refresh Capability for BGP-4
RFC2439: BGP Route Flap Damping
RFC1997: BGP Communities Attribute
RFC2796: BGP Route Reflection
RFC3065: Autonomous System Confederations for BGP
draft-ietf-idr-restart-08: Graceful Restart Mechanism for BGP
5.2 BGP Configuration Task List
Complete the following tasks to configure BGP:
Configuring BGP Basic Functions
Controlling Route
Distribution and
Reception
Configuring BGP Route Attributes
Task
Configuring BGP Route
Redistribution
Configuring BGP Route
Summarization
Advertising a Default Route to a
Peer or Peer Group
Configuring BGP Route Distribution
Filtering Policies
Configuring BGP Route Reception
Filtering Policies
Enabling BGP and IGP Route
Synchronization
Configuring BGP Route Dampening
5-19
Chapter 5 BGP Configuration
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required