H3C S3610-28P Operation Manual page 557

Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
192.168.2.0/24
Total Nets: 5
Intra Area: 1
6.7 Troubleshooting Routing Policy Configuration
6.7.1 IPv4 Routing Information Filtering Failure
I. Symptom
Filtering routing information failed, while routing protocol runs normally.
II. Analysis
At least one item of the IP prefix list should be configured as permit mode, and at least
one node in the Route-policy should be configured as permit mode.
III. Processing procedure
1) Use the display ip ip-prefix command to display IP prefix list information.
2) Use the display route-policy command to display routing policy information.
1 Type2
Inter Area: 0 ASE: 4
6-14
Chapter 6 Routing Policy Configuration
1 192.168.1.2
NSSA: 0
192.168.2.2