H3C S3610-28P Operation Manual page 1495

Operation Manual – RRPP
H3C S3610&S5510 Series Ethernet Switches
Enter system view
Create an RRPP domain
and enter its view
Specify a control VLAN for
the RRPP domain
Specify the current device
as the transit node of the
primary ring, and specify
the primary port and the
secondary port
Specify the current device
as the assistant edge
node of the subring, and
specify a common port
and an edge port
Enable the primary ring
Enable the subring
Return to system view
Enable RRPP
To do...
system-view
rrpp domain domain-id
control-vlan vlan-id
ring ring-id node-mode
transit [ primary-port
interface-type
interface-number ]
[ secondary-port
interface-type
interface-number ] level
level-value
ring ring-id node-mode
assistant-edge
[ common-port
interface-type
interface-number ]
[ edge-port interface-type
interface-number ]
ring ring-id enable
ring ring-id enable
quit
rrpp enable
Use the command...
1-16
Chapter 1 RRPP Configuration
Remarks
—
Required
Required
Required
Required
Required
By default, the RRPP ring
is disabled.
Required
By default, the RRPP ring
is disabled.
—
Required
By default, RRPP is
disabled.