H3C S3610-28P Operation Manual page 1448

Operation Manual – MCE
H3C S3610&S5510 Series Ethernet Switches
[PE-bgp-vpn1] peer 10.100.10.1 as-number 100
# Display the information about the routes of VPN1 on PE.
<PE-bgp-vpn1> display ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destination/Mask
127.0.0.0/8
127.0.0.1/32
10.100.10.0/24
10.100.10.3/32
172.16.10.0/24
# For VPN2, perform the configurations similar to the above on MCE and PE to import
the OSPF routing information of VPN2 to the EBGP routing table. Configuration
procedures are omitted here. Followed is the result of the above configurations.
<PE> display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destination/Mask
127.0.0.0/8
127.0.0.1/32
10.100.20.0/24
10.100.20.3/32
172.16.20.0/24
After the above configurations, MCE has imported the OSPF routing information of
VPN1 and VPN2 to the EBGP routing table of PE properly.
Destinations : 5
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
BGP 255
Destinations : 5
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
BGP 255
Routes : 5
Cost NextHop
0 127.0.0.1
0 127.0.0.1
0 10.100.10.3
0 127.0.0.1
2 10.100.10.2
Routes : 5
Cost NextHop
0 127.0.0.1
0 127.0.0.1
0 10.100.20.3
0 127.0.0.1
2 10.100.20.2
2-23
Chapter 2 MCE Configuration
Interface
InLoop0
InLoop0
Vlan2
InLoop0
Vlan2
Interface
InLoop0
InLoop0
Vlan3
InLoop0
Vlan3