H3C S3610-28P Operation Manual page 816

Operation Manual – Multicast Protocol
H3C S3610&S5510 Series Ethernet Switches
toward the multicast source. Switches on the SPT path (Switch A and Switch D) have
generated an (S, G) entry, while Switch E, which is not on the SPT path, does not have
multicast routing entries. You can use the display pim routing-table command to view
the PIM routing table information on each switch. For example:
# View the PIM routing table information on Switch A.
[SwitchA] display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 232.1.1.1)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: Vlan-interface101
Downstream interface(s) information:
Total number of downstreams: 1
The information on Switch B and Switch C is similar to that on Switch A.
# View the PIM routing table information on Switch D.
[SwitchD] display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 232.1.1.1)
Protocol: pim-ssm, Flag:
UpTime: 00:12:05
Upstream interface: Vlan-interface300
Downstream interface(s) information:
Total number of downstreams: 1
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
1: Vlan-interface100
Protocol: pim-ssm, UpTime: 00:13:25, Expires: -
Upstream neighbor: NULL
RPF prime neighbor: NULL
1: Vlan-interface105
Protocol: pim, UpTime: 00:12:05, Expires: 00:03:25
6-51
Chapter 6 PIM Configuration