Configuring Optional Parameters Common To An Nqa Test Group - H3C S3610-28P Operation Manual

Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Failures due to Internal Error: 0
Failures due to Other Errors: 0
1.3 Configuring Optional Parameters for NQA Tests
Unless otherwise specified, the following parameters are applicable to all test types and
they can be configured according to the actual conditions. Optional parameters
common to NQA are valid for all NQA tests, while those common to an NQA test group
are valid only for tests in this test group. This section covers these topics:
Configuring Optional Parameters Common to NQA

Configuring Optional Parameters Common to an NQA Test Group

Configuring Trap Delivery
1.3.1 Configuring Optional Parameters Common to NQA
Follow these steps to configure optional parameters common to NQA:
Enter system view
Configure the maximum
number of tests that the
NQA client can
simultaneously perform
1.3.2 Configuring Optional Parameters Common to an NQA Test Group
Follow these steps to configure the optional parameters common to an NQA test group:
Enter system view
Enter NQA test group
view
Configure a descriptive
string for a test group
Configure the interval of
performing a cyclic test
To do...
system-view
nqa-agent max-requests
number
To do... Use the command...
system-view
nqa admin-name
operation-tag
description text
frequency interval
Use the command...
1-27
Chapter 1 NQA Configuration
Remarks
—
Optional
5 by default
Remarks
—
—
Optional
No descriptive string by
default.
Optional
No cyclic test is performed
by default.
This command is invalid for
the DHCP test.