H3C S3610-28P Operation Manual page 1173

Operation Manual – SNMP-RMON
H3C S3610&S5510 Series Ethernet Switches
value
Note:
The system information of the information center can be output to the terminal or to the
log buffer. In this example, SNMP log is output to the terminal. To set the SNMP log to
be output to other directions, refer to the Information Center Configuration part of the
manual.
Field
Value set when the SET operation is performed (This
field is , meaning the value obtained with the GET
operation is not logged.)
When the value is a string of characters and the string
contains characters not in the range of ASCII 0 to 127
or invisible characters, the string is displayed in
hexadecimal. For example, value = <81-43>[hex]
Description
1-12
Chapter 1 SNMP Configuration