Setting To Output System Information To The Trap Buffer - H3C S3610-28P Operation Manual

Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Configure the output rules
of the system information
Configure the format of
the time stamp for log
information

1.2.5 Setting to Output System Information to the Trap Buffer

Enter system view
Enable information
center
Name the channel with
a specified channel
number
Configure the channel
through which system
information can be
output to the trap buffer
and specify the buffer
size
Configure the output
rules of the system
information
Configure the format of
the time stamp
To do...
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
info-center timestamp
loghost { date |
no-year-date | none }
To do...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center trapbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Chapter 1 Information Center Configuration
Use the command...
Use the command...
1-11
Remarks
Optional
Refer to Table 1-4 for the
output rules of the system
information.
Optional
date by default.
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for
default channel names.
Optional
System information is
output to the trap buffer by
default with channel 3
(known as trapbuffer) as
the default channel and a
default buffer size of 256.
Optional
Refer to Table 1-4 for the
output rules of the system
information.
Optional
The time stamp for log,
trap and debug
information is date by
default.