Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Enter system view
Enter BGP view
Enter IPv6 address family
view
Configure a description
for a peer/peer group
Note:
The peer group to be configured with a description must have been created.
5.3.8 Disabling Session Establishment to a Peer/Peer Group
Follow these steps to disable session establishment to a peer/peer group:
Enter system view
Enter BGP view
Enter IPv6 address family
view
Disable session
establishment to a
peer/peer group
5.3.9 Logging Peer State Changes
Follow these steps to configure to log on the session and event information of a
peer/peer group:
Enter system view
Enter BGP view
Enable logging of peer
changes globally
Enter IPv6 address family
view
To do...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address }
description
description-text
To do...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ignore
To do...
system-view
bgp as-number
log-peer-change
ipv6-family
Use the command...
Use the command...
Use the command...
5-7
Chapter 5 IPv6 BGP Configuration
Remarks
—
Required
—
Optional
Not configured by default
Remarks
—
Required
—
Optional
Not disabled by default
Remarks
—
Required
Optional
Enabled by default
—