Port Mirroring - H3C S3610-28P Operation Manual

Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Enter system view
Enter traffic behavior view
Mirror traffic to a port
Caution:
A member port in a port aggregation group cannot function as the destination port
for traffic mirroring.
If the destination port for traffic mirroring is not the same port as the destination port
of the local port mirroring group, you cannot configure the two ports at the same time.
For the detailed information about local port mirroring group, refer to the Port
Mirroring module in this manual.
9.2.2 Mirroring Traffic to the CPU
Follow these steps to mirror traffic to the CPU:
Enter system view
Enter traffic behavior view
Mirror traffic to the CPU
9.3 Displaying Traffic Mirroring
Display the configuration
information about the
user-defined traffic behavior
Display the configuration
information about the
user-defined policy
To do...
system-view
traffic behavior behavior-name
mirror-to interface interface-type
interface-number
To do...
system-view
traffic behavior
behavior-name
mirror-to cpu
To do...
Chapter 9 Traffic Mirroring Configuration
Use the command...
Use the command...
Use the command...
display traffic behavior
user-defined behavior-name
display qos policy
user-defined policy-name
9-2
Remarks
—
Required
Required
Remarks
—
—
Required
Remarks
Available in
any view