Configuring Access Between The Management Device And Its Member Devices - H3C S3610-28P Operation Manual

Operation Manual – Cluster Management
H3C S3610&S5510 Series Ethernet Switches
1.4.4 Enabling the Cluster Function
Refer to
1.4.5 Deleting a Member Device from a Cluster
Enter system view
Enter cluster view
Delete a member device
from the cluster
1.5 Configuring Access Between the Management Device
and Its Member Devices
After having successfully configured NDP, NTDP and cluster, you can configure,
manage and monitor the member devices through the management device. You can
manage member devices in a cluster through switching from the operation interface of
the management device to that of a member device or configure the management
device by switching from the operation interface of a member device to that of the
management device.
Follow these steps to configure access between member devices of a cluster:
Switch from the operation device
of the management device to
that of a member device
Switch from the operation
interface of a member device to
that of the management device
Enabling the Cluster Function.
To do...
system-view
cluster
undo administrator-address
To do...
Chapter 1 Cluster Management Configuration
Use the command...
Use the command...
cluster switch-to
{ member-number |
mac-address mac-address |
sysname member-sysname }
cluster switch-to
administrator
1-16
Remarks
—
—
Required
Remarks
Required
Required