H3C S3610-28P Operation Manual page 1097

Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Table 5-1 The default values of dot1p-lp mapping table and dot1p-dp mapping table
Imported priority value
802.1p priority (dot1p)
0
1
2
3
4
5
6
7
The switch also provides DSCP precedence to local/drop/802.1p/DSCP precedence
mapping tables for the corresponding priority mapping. The default settings of these
priority mapping tables are shown in
table,
The dscp-lp mapping column lists the default target local precedence values,
available only for IP packets.
The dscp-dp mapping lists the default target drop precedence values, available
only for IP packets.
The dscp-dot1p mapping column lists the default target 802.1p precedence
values, available only for IP packets.
The dscp-dscp mapping column lists the default target DSCP precedence
values, available only for IP packets.
Table 5-2 The default values of dscp-lp mapping, dscp-dp mapping, dscp-dot1p
mapping, and dscp-dscp mapping
Imported
priority value
DSCP
precedence
(dscp)
0 to 7
8 to 15
16 to 23
24 to 31
32 to 39
dot1p-lp mapping
Local precedence (lp)
2
0
1
3
4
5
6
7
Table
dscp-lp dscp-dp
mapping mapping
Local Drop
precedence precedence
(lp) (dp)
0 0
1 0
2 0
3 0
4 0
5-2
Chapter 5 Priority Mapping
dot1p-dp mapping
Drop precedence (dp)
0
0
0
0
0
0
0
0
5-2. As for the right most four columns of the
dscp-dot1p
mapping
802.1p priority
(dot1p)
0
1
2
3
4
dscp-dscp
mapping
DSCP
precedence
(dscp)
0
8
16
24
32