H3C S3610-28P Operation Manual page 1503

Operation Manual – RRPP
H3C S3610&S5510 Series Ethernet Switches
Specify the control VLAN for each domain;
Specify the node role of each device on each RRPP ring and the ports that access
the device to the RRPP rings;
Enable the RRPP rings;
Enable RRPP after completing the configuration of both domains.
III. Configuration procedure
1) Perform the following configuration on Device A:
<Device A> system-view
[Device A] rrpp domain 1
[Device A-rrpp-domain1] control-vlan 4090
[Device A-rrpp-domain1] ring 1 node-mode master primary-port ethernet 1/0/1
secondary-port ethernet 1/0/2 level 0
[Device A-rrpp-domain1] ring 1 enable
[Device A-rrpp-domain1] quit
[Device A] rrpp enable
2) Perform the following configuration on Device B:
<Device B> system-view
[Device B] rrpp domain 1
[Device B-rrpp-domain1] control-vlan 4090
[Device B-rrpp-domain1] ring 1 node-mode transit primary-port ethernet 1/0/1
secondary-port ethernet 1/0/2 level 0
[Device B-rrpp-domain1] ring 1 enable
[Device B- rrpp-domain1] quit
[Device B] rrpp domain 2
[Device B-rrpp-domain2] control-vlan 4092
[Device B-rrpp-domain2] ring 2 node-mode transit primary-port ethernet 1/0/2
secondary-port ethernet 1/0/3 level 0
[Device B-rrpp-domain2] ring 2 enable
[Device B-rrpp-domain2] quit
[Device B] rrpp enable
3) Perform the following configuration on Device C:
<Device C> system-view
[Device C] rrpp domain 1
[Device C-rrpp-domain1] control-vlan 4090
[Device C-rrpp-domain1] ring 1 node-mode transit primary-port ethernet 1/0/1
secondary-port ethernet 1/0/2 level 0
[Device C-rrpp-domain1] ring 1 enable
[Device C-rrpp-domain1] quit
[Device C] rrpp domain 2
[Device C-rrpp-domain2] control-vlan 4092
1-24
Chapter 1 RRPP Configuration