Configuring Remote Port Mirroring - H3C S3610-28P Operation Manual

Operation Manual – Port Mirroring
H3C S3610&S5510 Series Ethernet Switches

1.3 Configuring Remote Port Mirroring

1.3.1 Configuring a Remote Source Mirroring Group
Follow these steps to configure a remote port mirroring group
To do...
Enter system view
Create a remote
source mirroring group
Add ports
to the
mirroring
group as
source
ports
Add a
port to
the
mirroring
group as
the
reflector
mirroring
port
Configure the remote
port mirroring VLAN for
the mirroring group
Use the command...
system-view
mirroring-group group-id
remote-source
mirroring-group group-id
In system
mirroring-port mirroring-port-list
view
{ both | inbound | outbound }
interface interface-type
interface-number
In
[ mirroring-group group-id ]
interface
mirroring-port { both | inbound
view
| outbound }
quit
In system mirroring-group group-id
view
reflector-port reflector-port-id
interface interface-type
interface-number
In
interface mirroring-group group-id
view reflector-port
quit
mirroring-group group-id
remote-probe vlan
rprobe-vlan-id
1-5
Chapter 1 Port Mirroring Configuration
Remarks
—
Required
You can add ports to
a source port
mirroring group in
either system view or
interface view. They
achieve the same
purpose.
You can add ports to
a source mirroring
group in either system
view or interface view.
They achieve the
same purpose.
Required