H3C S3610-28P Operation Manual page 740

Operation Manual – Multicast Protocol
H3C S3610&S5510 Series Ethernet Switches
II. Network diagram
Figure 3-5 Network diagram for MLD Snooping querier configuration
III. Configuration procedure
1) Configure switch A
# Enable MLD Snooping globally.
<SwitchA> system-view
[SwitchA] mld-snooping
[SwitchA-mld-snooping] quit
# Create VLAN 100 and add Ethernet 1/0/1 and Ethernet 1/0/2 to VLAN 100.
[SwitchA] vlan 100
[SwitchA-vlan100] port ethernet 1/0/1 ethernet 1/0/2
# Enable MLD Snooping in VLAN 100 and configure the MLD-Snooping querier
feature.
[SwitchA-vlan100] mld-snooping enable
[SwitchA-vlan100] mld-snooping querier
2) Configure Switch B
# Enable MLD Snooping globally.
<SwitchB> system-view
[SwitchB] mld-snooping
[SwitchB-mld-snooping] quit
# Create VLAN 100, add Ethernet 1/0/1 through Ethernet 1/0/3 into VLAN 100, and
enable MLD Snooping in this VLAN.
[SwitchB] vlan 100
[SwitchB-vlan100] port ethernet 1/0/1 to ethernet 1/0/3
[SwitchB-vlan100] mld-snooping enable
Chapter 3 MLD Snooping Configuration
3-27