Setting To Output System Information To A Monitor Terminal - H3C S3610-28P Operation Manual

Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Enable the display of log
information on the
console
Enable the display of trap
information on the
console

1.2.3 Setting to Output System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal
that has login connections through the AUX, or VTY user interface.
I. Setting to output system information to a monitor terminal
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to a monitor terminal
Configure the output rules
of the system information
Configure the format of
the time stamp
To do...
terminal logging
terminal trapping
To do...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center monitor
channel
{ channel-number |
channel-name }
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Chapter 1 Information Center Configuration
Use the command...
Use the command...
1-9
Remarks
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for
default channel names.
Optional
System information is
output to the monitor
terminal by default with
channel 1 as the default
channel.
Optional
Refer to Table 1-4 for the
default output rules of the
system information.
Optional
By default, the time stamp
for log, trap and debug
information is date.