Configuring The Bims Server Information For The Client; Configuring Gateways For The Client - H3C S9500 Series Operation Manual

Operation Manual – DHCP
H3C S9500 Series Routing Switches
To configure WINS servers and NetBIOS node type in the DHCP address pool, use the
following commands:
Enter system view
Enter DHCP address
pool view
Specify WINS server
IP addresses for the
client
Specify the NetBIOS
node type
Note:
If b-node is specified for the client, you need to specify no WINS server address.

2.5.7 Configuring the BIMS server Information for the Client

A DHCP client performs regular software update and backup using configuration files
obtained from a branch intelligent management system (BIMS) server. Therefore, the
DHCP server needs to offer DHCP clients the BIMS server IP address, port number,
shared key from the DHCP address pool.
To configure the BIMS server IP address, port number, and shared key in the DHCP
address pool, use the following commands:
Enter system view
Enter DHCP address pool
view
Specify the BIMS server
IP address, port number,
and shared key

2.5.8 Configuring Gateways for the Client

DHCP clients wanting to access hosts outside the local subnet request gateways to
forward data. You can specify gateways in each address pool for clients. Up to eight
gateways can be specified in a DHCP address pool.
To do... Use the command...
system-view
dhcp server ip-pool
pool-name
nbns-list ip-address&<1-8>
netbios-type { b-node |
h-node | m-node | p-node }
To do...
system-view
dhcp server ip-pool
pool-name
bims-server ip ip-address
[ port port-number ] sharekey
key
Chapter 2 DHCP Server Configuration
Use the command...
2-9
Remarks
—
—
Required (optional for
b-node)
No address is specified by
default
Required
Not specified by default
Remarks
—
—
Required
Not specified by
default