Dhcp Client Configuration Example - H3C S3610-28P Operation Manual

Operation Manual – DHCP
H3C S3610&S5510 Series Ethernet Switches

4.4 DHCP Client Configuration Example

I. Network requirements
On a LAN, Switch B contacts the DHCP server via VLAN-interface 1 to obtain an IP
address.
II. Network diagram
See Figure
III. Configuration procedure
The following is the configuration on Switch B shown in
# Enable the DHCP client on VLAN-interface 1.
<SwitchB> system-view
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ip address dhcp-alloc
Note:
To implement the DHCP client-server model, you need to perform related configuration
on the DHCP server. For details, refer to
2-1.
Chapter 4 DHCP Client Configuration
Figure
DHCP Server Configuration
4-3
2-1.
Examples.