H3C S3610-28P Operation Manual page 1258

Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Table 1-4 Default output rules for different output directions
Output
directio
n
Consol
e
Monitori
ng
terminal
Log
host
Trap
buffer
Log
buffer
SNMP
NMS
II. Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the
associated display function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the
console:
Enable the monitoring of
system information on the
console
Enable the display of
debug information on the
console
LOG
Module
s
Enable
allowe
d/disab
d
led
default
(all Enable
module d
s)
default
(all Enable
module d
s)
default
(all Enable
module d
s)
default
(all Disable
module d
s)
default
(all
Enable
module d
s)
default
(all Disable
module d
s)
To do...
terminal monitor
terminal debugging
Chapter 1 Information Center Configuration
TRAP
Enable
Severit
d/disab
y
led
warning Enable
s d
warning Enable
s d
informat Enable
ional d
informat Enable
ional d
warning Disable
s d
debuggi Enable
ng d
Use the command...
1-8
DEBUG
Enable
Severit
d/disab
y
led
debuggi Enable debuggi
ng d ng
debuggi Enable debuggi
ng d ng
debuggi Disable debuggi
ng d ng
warning Disable debuggi
s d ng
debuggi Disable debuggi
ng d ng
warning Disable debuggi
s d ng
Remarks
Optional
Enabled on the console
and disabled on the
monitoring terminal by
default.
Required
Disabled by default
Severit
y