H3C S3610-28P Operation Manual page 689

Operation Manual – Multicast Protocol
H3C S3610&S5510 Series Ethernet Switches
Configuring IGMP
Snooping Port
Functions
Configuring IGMP
Snooping Querier
Configuring an IGMP
Snooping Policy
Note:
Configurations made in IGMP Snooping view are effective for all VLANs, while
configurations made in VLAN view are effective only for ports belonging to the
current VLAN. For a given VLAN, a configuration made in IGMP Snooping view is
effective only if the same configuration is not made in VLAN view.
Configurations made in IGMP Snooping view are effective for all ports;
configurations made in Ethernet port view are effective only for the current interface;
configurations made in port group view are effective only for all the ports in the
current port group. For a given port, a configuration made in IGMP Snooping view is
effective only if the same configuration is not made in Ethernet port view or port
group view.
Chapter 2 IGMP Snooping Configuration
Task
Configuring Aging Timers for
Dynamic Ports
Configuring Static Ports
Configuring Simulated Joining
Configuring Fast Leave Processing
Enabling IGMP Snooping Querier
Configuring IGMP Queries and
Responses
Configuring Source IP Address of
IGMP Queries
Configuring a Multicast Group Filter
Configuring the Function of
Dropping Unknown Multicast Data
Configuring IGMP Report
Suppression
Configuring Maximum Multicast
Groups that Can Be Joined on a
Port
Configuring Multicast Group
Replacement
2-7
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional